Sealand 111 User Manual download pdf (Page 6)

6

TROUBLESHOOTING GUIDE

SEALAND TOILET

BASE ASSEMBLY

ADJUSTING NUT

SPRING

CARTRIDGE

WATER VALVE ASSEMBLY

TOP VALVE CAP

FILTER SCREEN

WATER VALVE SCREWS

VALVE BODY

SHAFT

PEDAL

COVER

BAND CLAMP

BALL SEAL

FLUSH BALL

CAM STRAP

BOWL SEAL

MODEL 111 TOILET BOWL, REAR VIEW

TOILET BOWL, REAR VIEW

(Models 510+, 511+, 2010, 2011)

VACUUM

BREAKER

WHITE CAP

HOSE

CONNECTION

VACUUM BREAKER/BOWL CONNECTION

VACUUM

BREAKER

HOSE

CONNECTION

VACUUM BREAKER/BOWL CONNECTION

1. Toilet emits odor (ﬂ ush ball

open).

2. Water will not stay in bowl.

3. Flush ball will not close

completely.

a. Odor emitting from base of toilet.

b. Plugged holding tank vent line.

a. Loose band clamp.

b. Improper seal around ﬂ ush ball

due to dirt or debris on ﬂ ush ball.

c. Worn or damaged seal.

d. Worn or damaged ﬂ ush ball.

a. Too much friction between ﬂ ush

ball and seal.

b. Water valve screws are too tight.

c. Defective spring cartridge.

a. Use SeaLand brand deodorants.

b. Clear obstruction from vent line.

a. Tighten adjusting screw.

b. Inspect ﬂ ush ball and seal for

foreign debris. Clean ﬂ ush ball

and seal if needed.

c. Replace seal.

d. Replace ﬂ ush ball.

a. Lubricate between ﬂ ush ball and

seal with furniture polish (e.g.

Pledge

®

furniture polish).

b. Loosen screws slightly.

c. Check spring tension by pushing

ﬂ ush lever down, then release it

suddenly. If lever does not snap

back to original position, replace

spring cartridge.

Problem Possible Cause Service Instructions

® Pledge is a registered trademark of S.C. Johnson & Son Inc.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments