Sealand 711-M28 Toilet User Manual download pdf (Page 2)

RECOMMENDATIONS

SPECIFICATIONS

Product Name: 711-M28 SeaLand Marine Toilet

Shipping Information:

Carton Sizes:

Toilet 21" x 18-1/2" x 13-1/2"

(533mm x 470mm x 343mm)

Tank 19-1/4" x 17-1/2" x 11-1/2"

(489mm x 445mm x 292mm)

Weight Approx. 49 lbs. (22Kg)

System:

Average water consumption per ush 1 Qt. (.95L)

Minimum water consumption per ush 1 Pt. (.47L)

Holding tank capacity ...........9.5 Gal. (36L)

Fresh water supply pressure .........5-80 PSI

Water inlet size ....................1/2" NPT

Holding tank discharge tting .......1-1/2" NPT

Vent tting....................... 5/8" Barb

Unit weight ..................41 Lbs. (19Kg)

Dimensions:

1. Read the “Operating Instructions” section of the

manual carefully.

2. Make sure all guests understand the operation of

the SeaLand toilet.

3. Carry a few spare parts for the maintenance pur-

poses. Dometic has developed several repair kits

that will save you both time and expense should a

problem occur. See “Customer Service” section of

this manual.

4. Use only SeaLand brand

Tissue and SeaLand

brand Holding Tank Deodorants to maintain a

trouble-free system.

5. Do not use chlorine or caustic chemicals, such as

laundry bleach or drain opening types, in the

system. These products damage the seals in

toilets.

6. Do not ush foreign objects through the toilet.

7. Do not allow small problems to go unsolved. As

soon as a problem is detected, correct it.

INSTALLATION INSTRUCTIONS

Tank:

1. Select position in bathroom where unit can operate

properly. Allow room for using the ush lever and

clearance for raising the seat and lid.

2. Position the tank 3/4" (19mm) away from the wall.

Mark four holes at mounts on tank base. After holes

are marked, remove tank, and drill pilot holes. Slide

tank back into position. Secure the tank with four

#14 x 2" long pan head screws and washers on all

tank mounts.

3. Run 5/8" (16mm) I.D. hose to vent tting and secure

with hose clamps.

Install thru-hull vent tting:

(not supplied with unit – SeaLand part number 307236368)

4. Drill hole through the hull, well above water line

and directly above SeaLand toilet. Hole location is

determined by routing and length of hose.

TABLE OF CONTENTS

Specications .........................2

Recommendations .....................2

Installation Instructions ............... 2 - 4

Operating Instructions ...................4

Maintenance ....................... 4 - 5

Preparing for Summer Use ...............5

Model Identication . . . . . . . . . . . . . . . . . . . . . 5

Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Customer Service ......................5

Troubleshooting Guide ..................6

Limited Warranty .......................8

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Sealand 711-M28 Toilet User Manual Page 2

Comments to this Manuals

Related products and manuals for Accessories for water Sealand 711-M28 Toilet