Sealand 711-M28 Toilet User Manual download pdf (Page 4)

INSTALLATION INSTRUCTIONS (cont'd)

Water line:

17. Locate water valve at rear of ush lever.

18. Attach water supply pipe or hose from water system

to inlet tting on back of water valve.

Pedestal cover:

19. Slide back side of pedestal cover around rear of

toilet base and snap in groove. Close front half of

pedestal cover and snap in groove.

Flush pedal cover:

20. Put ush pedal cover back in place.

OPERATING INSTRUCTIONS

To properly use the SeaLand toilet, follow these simple

instructions:

1. A good biodegradable tissue such as SeaLand

brand is recommended.

2. To add water to the toilet before using, lift or raise

the ush pedal.

3. To ush toilet, push pedal all the way down until

sewage leaves the toilet bowl. Water ow pressures

vary at different locations and therefore, holding the

ush lever down 4-8 seconds may be required. We

recommend 2-4 GPM (8-15 Lpm) for proper rim and

bowl wash.

4. Release ush pedal by allowing it to snap back, which

permits positive sealing around the ush ball.

5. A small amount of water should remain in the bowl.

Note: Holding the ush pedal down longer than neces-

sary results in excessive water usage.

CAUTION: Do not dispose of sanitary napkins or other

non-dissolving items in the toilet.

MAINTENANCE

CLEANING

The SeaLand toilet should be cleaned regularly for

maximum sanitation and operational efciency.

Clean the toilet bowl with a mild bathroom cleaner,

such as SeaLand

Toilet Bowl Cleaner. Do not use

chlorine or alcohol-based caustic chemicals such as

drain opening types, as they will damage the seals.

If an odor is apparent from the toilet:

1. Clean out system by ushing several gallons of fresh

water through with one cup of liquid laundry soap.

2. Add odor control deodorant in amount specied for

your holding tank capacity after cleaning and every

few days during use.

WINTERIZING

At the end of each season, the SeaLand toilet should be

winterized for storage by either draining or using potable,

water-safe antifreeze in the system.

To drain:

1. Thoroughly ush system with fresh water.

2. Empty holding tank.

3. Shut off water supply to toilet. Remove inlet

waterline.

4. Press flush lever until all water is drained from

toilet.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Sealand 711-M28 Toilet User Manual Page 4

Comments to this Manuals

Related products and manuals for Accessories for water Sealand 711-M28 Toilet